Which machine suits angled mold cooling holes?
Use AMD when holes require five-axis positioning. Its AMD-280 B-axis covers 360° and A-axis covers −35° to +20°.
BUYER SELECTION GUIDE
Deep Hole Drilling Machine for Mold Making
For mold plates requiring drilling plus milling, start with the DM Series; use AMD when cooling holes enter at multiple angles or faces. DM-1300 lists a 1,500 × 1,000 mm worktable, while AMD-280 lists 2,800/1,600/1,500 mm X/Y/Z travel.
Request Configuration
VERIFIABLE HYM DATA
Key figures for initial selection
DM-1300 table1,500 × 1,000 mm
DM drilling depth1,100 mm
AMD X travel2,800 mm
AMD B-axis360°
Representative published data; final capability is confirmed against the workpiece and selected configuration.
View the related HYM product page →BUYER QUESTIONS
Frequently asked questions
What information should a buyer send?
Send the drawing, material, hole diameter, depth, angle, tolerance and production target. These seven values support an initial machine review.
Are published specifications guaranteed for every part?
No. Published figures are representative machine data; final capability depends on material, tooling, process and selected configuration.